Short Description
1. 3 point hitch Attached Wood Chipper to your tractor2. Removable Long safety
kit with CE approval3. Rotary Output Device for Waste4. MAX 7.9 inch cutting
Diameter5. Easier to move because of the less weight6. PTO Shaft inclueded
Description
WC-8 IS OUR BEST SELLING MECHANICAL POWER FEED WOOD CHIPPER. THIS
MACHINE OFFERS LARGE CAPACITY CAPABILITY. THIS IS GREAT CHIPPER FOR THE SMALL
OR
LARGE CLEANUP JOB. THIS CHIPPER OFFERS A POWER-FEED ROLLER . THE WC-8 PRO ALSO
FEATURES A HORIZONTAL IN-FEED BIN WHICH MAKES LOADING MATERIAL INTO IT LESS
PHYSICALLY DEMANDING THAN OUR PINCH & PULL SELF FEED CHIPPERS.
Be it pruning’s, wind fall, branches to small for firewood, construction scrap
or whatever the source, now you can chip wood as easily as you burn. Plus you
can chip when you cannot burn.
We call it Pro because it offers several new features that improve on an
already great design and make it more suitable for the home owner with a
subcompact or compact tractor . We have redesigned the flywheel housing to
allow full access with the removal of one bolt. We have added feed guides on
each side of the power feed roller to improve the feeding of small diameter
material and to reduce small material from catching on the sides of the roller.
We have added material Feed Edge guides to the roller for the same reason. We
have reduced the rotor mass to 137 lbs so less powerful tractors can power the
flywheel and have the advantages of a proven power feed design. We have made
the pressure on the feed roller adjustable. We have redesigned the stand to
include an adjustable base that lowers the chipper.
Infeed Opening
The opening in the flywheel housing is a large 8"*8" square making it quite
easy to accept branches with several limbs. This reduces the need to trim your
branches down before down before feeding them into the chipper.
Flywheel
The dynamically balanced 24" diameter, 1" thick solid steel flywheel runs on a
2" diameter shaft and is supported by 2 industrial and greaseable flanged
bearings. It features four CNC machined pockets to hold the reversible blades.
The flywheel features four large fan blade paddles that spin at over 1,100 RPM
ensuring maximum airflow.
Drive Belt System
The drive belt system is encased by a quarter inch thick steel guard which can
quickly be rotated forward to access the drive system. Simply pull the pin at
the top and the guard folds forward, providing quick and complete access to the
entire drive system. The PTO shaft (included with chipper) connects from your
tractor to the chippers lower 2" shaft. Four heavy duty cogged BX series drive
belts run up to the flywheel main shaft. These belts are standard off the shelf
replacement parts. They are automatically kept in proper tension via the self
tensioning system. This system dramatically increases belt life, reduces belt
slippage and saves the user from manually adjusting for belt tension. Changing
belts are also made easy as the tensioning system can easily be pulled back out
of the way allowing the belts to be changed out quickly.
Discharge chute
The discharge chute was designed to rotate 360 degrees by simply rotating it
with the two handles to the desired angle. This makes it possible to direct the
wood chips in any direction regardless of the location of the chipper. The end
of the chute stands at 79" (2.0m) off of the ground, making it quite easy to
direct the wood chips into the back of a truck or trailer if desired. Located
at the end of the discharge chute is a rotating deflector, which allows further
control of the location of the wood chips. Simply point it straight for maximum
distance or angled down to deflect the chips directly down to the ground or
into a trailer.
PTO Shaft
Included with the WC8 chipper is the PTO shaft complete with a shear pin.
More Photos
Technical Details
DIMENSIONS (L×W×H) 63*40*55 inch
RADIUS OF BLADE DISC 11.89 inch
STRUCTURE WEIGHT 816lb
CHIPPING DIAMETER 7.87inch
WORKING EFFICIENCY 8-9m³/h
PTO TURNNING SPEED 540r/min
PTO SPLINE 0.24*0.24*20.47inch
POWER REQUIREMENT 25-45hp
Additional Information
Condition: New A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ... |
UPC: Does Not Apply |